Hydraulic 6C T6D T6E T7E Single Vane Pump T6CC0170031L00C101

We specialize in producing Hydraulic Parker Denison Vane Pump T6CC0170031L00C101

– The high pressure capability to 4000 PSI, in the small envelope, reduces installation costs and provides extended life at reduced pressure.
– The high volumetric efficiency, typically 94%, reduces heat generation, and allows speeds down to 400 RPM at full pressure.
– The high mechanical efficiency, typically 94%, reduces energy consumption.
– The wide speed range from 400 RPM to 2800 RPM, combined with large size cartridge displacements, will optimize operation for the lowest noise level in the smallest envelope.
– The low speed 400 RPM, low pressure, high viscosity 9240 SUS allow application in cold environments with minimum energy consumption and without seizure risk.
– The low ripple pressure=± 29 PSI reduces piping noise and increases life time of other components in the circuit.
– The high resistance to particle contamination because of the double lip vane increases pump life.
– The double shaft seal (T6*P version) and drain hole allow direct mounting onto gear boxes.
– The large variety of options (cam displacement, shaft, porting) allows customized installation.
– The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.

Ordering code:
T6C - 017 - 1R00 - B1
T6C= model for T6C, T6D, T6E, T7E
017= Ring Size (US gallon),
T6C - 003, 005, 006, 008, 010, 012, 014, 017, 020, 022, 025, 028, 031
T6D - 014, 020, 024, 028, 031, 035, 038,042, 045, 050, 061
T6E- 024, 045, 050, 052, 057, 066, 072, 085
T7E- 024, 045, 050, 052, 057, 066, 072, 085

1= Shaft type
For T6C
1 - SAE B Keyed Shaft
2 - Keyed Shaft
3 - SAE B Splined Shaft
4 - SAE BB Splined Shaft
For T6D
1 - SAE C Keyed Shaft
2 - Keyed Shaft
3 - SAE C Splined Shaft
4 - Splined Shaft
R= Shaft Rotation
R - Turn right
L - Turn left
(Viewed from shaft end)
00= Inlet Port position
(Viewed from cover end)
00 - Opposite Outlet
02 - 90o CCW from Outlet
01 - Inline with Outlet
03 - 90o CW from Outlet
B= Design
Subject to change
1= Seal
5 - Viton seal
Technical Data of Denison vane pump
Table of values (theoretical values, without efficiency and tolerances; values rounded)